Add occupancy sensors

1. Select a capacity object (grey circle) to add a sensor

2. Add a new sensor by clicking '+ Add Sensor' button.

3. Select ‘Scan QR code' or 'Enter code’

   1. If you enter the code manually, it is case sensitive

4. The capacity object is colored based on the latest received message from the sensor:

   • time stamp: time of the last received message from the sensor

   • blue =  motion detected

   • green = no motion detected

   • orange = the system has not received any message from the sensor

   • grey = no sensors have been added to the capacity object

• You can add another sensor to the same object or add a sensor to another object by selecting a new object

• Sensor messages are automatically refreshed every 30 seconds or manually by clicking the ”Update” button

• You can close a capacity object by clicking that object or by swiping the selection pane from bottom-up

Delete occupancy sensors

1. Select a capacity object that has a sensor installed

2. Press the sensor ID a few seconds

   • With iPhone you can delete a sensor also by by swiping the sensor ID to the left

3. Click 'Delete'

• If you added a sensor to a wrong capacity object by mistake, select a new object and add the sensor to it. The sensor will automatically be deleted from the previous object.

• A same sensor can only be added to one capacity object at a time