Versions Compared
Key
- This line was added.
- This line was removed.
- Formatting was changed.
Table of Contents |
---|
Indoor Air sensors can measure humidity, temperature, CO₂ and VOC.
Installation process
1. Turn on the device
2. Read the device’s QR code with Optimaze Inventory
3. Install the device
Info |
---|
For the installation you need:
|
Best practices for installing indoor air quality devices
Place the device in a central location to approx. 1.2m – 1.8m height
Avoid placing the sensor to close proximity of windows
Most of CO₂ indoors is produced by breathing, the device should not be placed too close to humans
Air conditioning, height & volume of the space affect the sensor device
Connected AirWits
Measures | Manufacturer’s website | |
---|---|---|
Connected AirWits CO2 | CO₂, humidity, temperature | https://www.connectedfinland.fi/en/products/connected-airwits-co2/ |
Connected AirWits IAQ | VOC, humidity, temperature | https://www.connectedfinland.fi/en/products/connected-airwits-iaq/ |
Network & Coverage
The devices use Sigfox 0g network, read more about it here.
Check the connectivity of Sigfox network in your location from these websites:
Globally via: https://www.sigfox.com/en/coverage
In Finland via: https://coverage.iniot.fi/
Installation
1. Scan the QR code or enter the sensor ID manually with Optimaze Inventory
2. Switch the device on sliding the power switch to position “1”
3. Install the wall plate to the wall using screws suitable for the wall material. Please note the orientation!
Note |
---|
Avoid placing device closer than 15cm on any metal or magnetic object, electric cables, electric devices or selective glass as this will dramatically reduce radio performance as well as battery life of the device. |
4. Attach the device to the wall having the pins meeting installation holes in the device. Please note the orientation!