Adding

occupancy sensors

1. Tap a capacity object (circle with black border) on the floor plan

   1. white circles with + icon don't have any sensors yet

2. Add a new sensor by tapping the + Add button

3. Point the phone to the sensor's QR code.
   • Alternatively, tap Enter code and enter the code manually. The code is case sensitive.
4. The sensor appears on the bottom panel

5. You can add another sensor to the same object or add a sensor to another object by selecting a new object

   1. The
capacity object is
6. 1. number on the capacity object shows how many sensors have been added in that location
7. You can close a capacity object by tapping outside the bottom panel

The capacity objects are colored based on the connectivity status of the sensor:

• • yellow:  sensor has not sent any data yet

  • green

• • : sensor has sent data in the past

• • 24 hours

  • red

• • : last sensor update was more than 24 hours ago, which probably means the device battery is empty

  • white with + icon

• • : no sensors have been added

You can add another sensor to the same object or add a sensor

• • to

another object by selecting a new objectThe number on

• • the capacity object

shows how many sensors has been added in the location

Sensor

statuses are automatically refreshed every 30 seconds or manually by clicking the Image Modified button

.

For more details about status information, see Monitor device statuses.

Removing occupancy sensors

1. Select Tap a capacity object that has a sensor installed

2. Press the sensor ID a few seconds

3. Tap Remove in the confirmation dialog

If you added a sensor to incorrect capacity object by mistake, select a new object and add the sensor to it. The sensor will automatically be removed from the previous object.

A sensor can only be added to one capacity object at a time.